Picking the wrong charge controller wastes money — either overspending on MPPT you don't need, or underperforming with PWM on a large panel. This guide helps you choose correctly. ভুল চার্জ কন্ট্রোলার বেছে নেওয়া মানেই টাকার অপচয় — অপ্রয়োজনীয় MPPT-তে বেশি খরচ, অথবা বড় প্যানেলে দুর্বল PWM দিয়ে কম ফলাফল। এই গাইড আপনাকে সঠিক পছন্দ করতে সাহায্য করবে।
When building a home solar system in Bangladesh, the charge controller is the component people think about least — but get wrong most often. Buy a PWM when you need MPPT and you waste solar energy every single day. Buy an MPPT when PWM is enough and you overspend by ৳4,000–৳5,000 for no benefit. বাংলাদেশে হোম সোলার সিস্টেম তৈরিতে চার্জ কন্ট্রোলার সবচেয়ে কম ভাবা হয় — কিন্তু সবচেয়ে বেশি ভুল হয় এখানেই। যখন MPPT দরকার তখন PWM কিনলে প্রতিদিন সোলার শক্তি নষ্ট হয়। আবার PWM যথেষ্ট হলেও MPPT কিনলে কোনো সুবিধা ছাড়াই ৳৪,০০০–৳৫,০০০ বেশি খরচ হয়।
📋 Table of Contents 📋 বিষয়সূচি
A charge controller sits between your solar panels and your battery. Its job is to regulate the electricity flowing from the panels so it charges the battery safely — without overcharging, which destroys batteries, and without undercharging, which shortens their lifespan. একটি চার্জ কন্ট্রোলার আপনার সোলার প্যানেল এবং ব্যাটারির মাঝখানে থাকে। এর কাজ হলো প্যানেল থেকে প্রবাহিত বিদ্যুৎ নিয়ন্ত্রণ করা যাতে ব্যাটারি নিরাপদে চার্জ হয় — অতিরিক্ত চার্জ ছাড়া, যা ব্যাটারি নষ্ট করে, এবং কম চার্জ ছাড়া, যা আয়ু কমায়।
Without a charge controller, your panels would push whatever voltage they produce directly into the battery — which would overcharge and permanently damage it within days. The controller is not optional. It is as essential as the battery itself. চার্জ কন্ট্রোলার ছাড়া, প্যানেলগুলো যে ভোল্টেজ উৎপাদন করে তা সরাসরি ব্যাটারিতে ঠেলে দেবে — যা কয়েক দিনের মধ্যে ব্যাটারিকে স্থায়ীভাবে নষ্ট করবে। কন্ট্রোলার ঐচ্ছিক নয়। এটি ব্যাটারির মতোই অপরিহার্য।
PWM stands for Pulse Width Modulation. A PWM controller works by rapidly switching the connection between the solar panel and battery on and off — thousands of times per second. As the battery nears full charge, the pulses get shorter and shorter until charging stops. PWM মানে Pulse Width Modulation। একটি PWM কন্ট্রোলার সোলার প্যানেল এবং ব্যাটারির মধ্যে সংযোগ দ্রুত চালু-বন্ধ করে কাজ করে — প্রতি সেকেন্ডে হাজার হাজার বার। ব্যাটারি পূর্ণ চার্জের কাছাকাছি এলে পালসগুলো ছোট হতে থাকে যতক্ষণ না চার্জিং বন্ধ হয়।
The key limitation: a PWM controller pulls the panel's output voltage down to match the battery voltage. If your panel produces 18V but your battery is 12V, the PWM simply drops the panel to 12V — wasting those extra 6 volts of potential energy entirely. মূল সীমাবদ্ধতা: একটি PWM কন্ট্রোলার প্যানেলের আউটপুট ভোল্টেজকে ব্যাটারি ভোল্টেজের সাথে মেলাতে নামিয়ে আনে। যদি আপনার প্যানেল ১৮V উৎপাদন করে কিন্তু ব্যাটারি ১২V হয়, PWM শুধু প্যানেলকে ১২V-তে নামিয়ে দেয় — সেই অতিরিক্ত ৬V সম্ভাব্য শক্তি সম্পূর্ণ নষ্ট করে।
MPPT stands for Maximum Power Point Tracking. Instead of dropping the panel voltage to match the battery, an MPPT controller uses a built-in DC-to-DC converter to step down the voltage while stepping up the current — keeping the total power (Watts = Volts × Amps) nearly the same. MPPT মানে Maximum Power Point Tracking। প্যানেল ভোল্টেজকে ব্যাটারির সাথে মেলাতে নামানোর পরিবর্তে, একটি MPPT কন্ট্রোলার বিল্ট-ইন DC-to-DC কনভার্টার ব্যবহার করে ভোল্টেজ কমিয়ে কারেন্ট বাড়ায় — মোট শক্তি (ওয়াট = ভোল্ট × অ্যাম্পিয়ার) প্রায় একই রাখে।
It also continuously tracks the panel's maximum power point — the exact voltage-current combination where the panel produces the most power at any given moment of light and temperature. This tracking happens hundreds of times per second, squeezing every last watt out of your panels. এটি ক্রমাগত প্যানেলের ম্যাক্সিমাম পাওয়ার পয়েন্ট ট্র্যাক করে — যেকোনো মুহূর্তে আলো ও তাপমাত্রায় প্যানেল যে নির্দিষ্ট ভোল্টেজ-কারেন্ট সমন্বয়ে সর্বোচ্চ শক্তি উৎপাদন করে। এই ট্র্যাকিং প্রতি সেকেন্ডে শত শত বার হয়, প্যানেল থেকে শেষ ওয়াটটুকুও বের করে নেয়।
| Featureবৈশিষ্ট্য | PWMPWM | MPPTMPPT |
|---|---|---|
| How it worksকাজের পদ্ধতি | Switches panel on/off rapidly to regulate chargeচার্জ নিয়ন্ত্রণে প্যানেল দ্রুত চালু-বন্ধ করে | Converts panel voltage down, current up via DC-DC converterDC-DC কনভার্টারে ভোল্টেজ কমিয়ে কারেন্ট বাড়ায় |
| Efficiencyদক্ষতা | 70–80%৭০–৮০% | 93–97%৯৩–৯৭% |
| Panel voltage requirementপ্যানেল ভোল্টেজ প্রয়োজনীয়তা | Must closely match battery voltageব্যাটারি ভোল্টেজের কাছাকাছি হতে হবে | Any panel voltage — very flexibleযেকোনো প্যানেল ভোল্টেজ — অনেক নমনীয় |
| Best panel sizeসেরা প্যানেল সাইজ | Up to 300W৩০০W পর্যন্ত | Above 300W৩০০W-এর উপরে |
| Energy harvest on same panelsএকই প্যানেলে শক্তি সংগ্রহ | Standardস্ট্যান্ডার্ড | Up to 30% more৩০% পর্যন্ত বেশি |
| Low-light performanceকম আলোতে পারফরম্যান্স | Averageগড় | Better — tracks optimal point continuouslyভালো — ক্রমাগত সর্বোত্তম পয়েন্ট ট্র্যাক করে |
| Price range (Alobari)দামের পরিসর (আলোবাড়ি) | ৳2,400 – ৳3,400৳২,৪০০ – ৳৩,৪০০ | ৳7,000৳৭,০০০ |
| Complexityজটিলতা | Simple — very reliableসহজ — অনেক নির্ভরযোগ্য | More complex internallyভেতরে বেশি জটিল |
PWM is the right choice in most standard home solar setups in Bangladesh. Here's when to go with it: বাংলাদেশের বেশিরভাগ স্ট্যান্ডার্ড হোম সোলার সেটআপে PWM সঠিক পছন্দ। কখন এটি বেছে নেবেন:
MPPT is worth the extra cost in specific situations. Here's when you genuinely need it: নির্দিষ্ট পরিস্থিতিতে MPPT-এর অতিরিক্ত দাম যুক্তিসঙ্গত। কখন আপনার সত্যিই এটি দরকার:
The ampere rating of a charge controller tells you the maximum current it can handle from your panels. The sizing formula is simple: একটি চার্জ কন্ট্রোলারের অ্যাম্পিয়ার রেটিং বলে এটি প্যানেল থেকে সর্বোচ্চ কত কারেন্ট সামলাতে পারে। সাইজিং ফর্মুলা সহজ:
Always leave ~10–15% headroom below the controller's rated capacity. So for a 20A controller with 240W capacity, keep your panel at or below 225W — not 240W — to avoid stressing the controller in peak sun conditions. সবসময় কন্ট্রোলারের রেটেড ক্যাপাসিটির ~১০–১৫% নিচে থাকুন। তাই 240W ক্যাপাসিটির 20A কন্ট্রোলারের জন্য, প্যানেল 240W নয়, ২২৫W বা তার কম রাখুন — পিক সান পরিস্থিতিতে কন্ট্রোলারে চাপ এড়াতে।
| Controllerকন্ট্রোলার | At 12V12V-এ | At 24V24V-এ | Safe Max Panelনিরাপদ সর্বোচ্চ প্যানেল |
|---|---|---|---|
| DEMUDA 20A PWM | 240W | 480W | ~225W (12V) / ~440W (24V) |
| DEMUDA 30A PWM | 360W | 720W | ~325W (12V) / ~650W (24V) |
| DEMUDA 40A PWM | 480W | 960W | ~440W (12V) |
| DEMUDA 50A PWM | 600W | 1200W | ~550W (12V) |
| EPEVER 30A MPPT | 360W | 720W | ~325W (12V) / ~625W (24V) |
We stock 4 PWM controllers and 1 MPPT controller — covering every common home solar setup in Bangladesh. Click any card to view the product. আমরা ৪টি PWM কন্ট্রোলার এবং ১টি MPPT কন্ট্রোলার স্টক করি — বাংলাদেশের প্রতিটি সাধারণ হোম সোলার সেটআপ কভার করে। পণ্য দেখতে যেকোনো কার্ডে ক্লিক করুন।
৳2,400
৳2,600
৳3,000
৳3,400
Can I use an MPPT controller with a small panel just to get better efficiency?ভালো দক্ষতার জন্য কি আমি ছোট প্যানেলে MPPT কন্ট্রোলার ব্যবহার করতে পারি?
Technically yes, but it's not worth it. On a 100–150W panel, the extra efficiency of MPPT translates to maybe 15–25Wh more per day — worth about ৳0.30 in electricity savings daily. At that rate it would take over 30 years to recover the ৳3,600 extra cost of MPPT over PWM. Stick with PWM for panels under 300W.প্রযুক্তিগতভাবে হ্যাঁ, কিন্তু এটি যুক্তিসঙ্গত নয়। ১০০–১৫০W প্যানেলে, MPPT-এর অতিরিক্ত দক্ষতা হয়তো প্রতিদিন ১৫–২৫Wh বেশি মানে — দৈনিক প্রায় ৳০.৩০ বিদ্যুৎ সাশ্রয়। সেই হারে MPPT-এর ৳৩,৬০০ অতিরিক্ত খরচ উসুল করতে ৩০ বছরেরও বেশি লাগবে। ৩০০W-এর নিচে প্যানেলে PWM-ই রাখুন।
My PWM controller is getting hot — is that normal?আমার PWM কন্ট্রোলার গরম হচ্ছে — এটা কি স্বাভাবিক?
Some warmth is normal during peak sun hours when the controller is working hard. Genuinely hot (too hot to touch) is not normal and usually means the controller is undersized for your panel — the current exceeds its rating. Check: Panel Watts ÷ Battery Voltage should be less than the controller's Amp rating.পিক সান আওয়ারে কন্ট্রোলার কঠিন কাজ করার সময় কিছুটা উষ্ণতা স্বাভাবিক। সত্যিকারের গরম (ছুঁতে পারবেন না) স্বাভাবিক নয় এবং সাধারণত বোঝায় কন্ট্রোলার আপনার প্যানেলের জন্য ছোট সাইজের — কারেন্ট রেটিং ছাড়িয়ে যাচ্ছে। পরীক্ষা করুন: প্যানেল ওয়াট ÷ ব্যাটারি ভোল্টেজ কন্ট্রোলারের অ্যাম্পিয়ার রেটিংয়ের কম হওয়া উচিত।
Can I connect two solar panels to one charge controller?একটি চার্জ কন্ট্রোলারে কি দুটি সোলার প্যানেল সংযুক্ত করা যাবে?
Yes — you can connect panels in parallel (same voltage, added current) as long as the total wattage stays within the controller's capacity. For example, two 150W panels in parallel = 300W total, which a DEMUDA 30A PWM at 12V handles (325W capacity). Never exceed the controller's rated capacity.হ্যাঁ — যতক্ষণ মোট ওয়াটেজ কন্ট্রোলারের ক্যাপাসিটির মধ্যে থাকে ততক্ষণ প্যানেল প্যারালেলে (একই ভোল্টেজ, বর্ধিত কারেন্ট) সংযুক্ত করতে পারবেন। যেমন, দুটি ১৫০W প্যানেল প্যারালেলে = মোট ৩০০W, যা 12V-এ DEMUDA 30A PWM (৩২৫W ক্যাপাসিটি) সামলাতে পারে। কখনো কন্ট্রোলারের রেটেড ক্যাপাসিটি অতিক্রম করবেন না।
Does MPPT work better in Bangladesh's cloudy weather?বাংলাদেশের মেঘলা আবহাওয়ায় কি MPPT ভালো কাজ করে?
Yes — MPPT has a meaningful advantage in low-light and cloudy conditions because it continuously finds the optimal operating point of the panel even as light levels change. In Bangladesh's monsoon season or hazy mornings, MPPT will harvest noticeably more energy than PWM from the same panels.হ্যাঁ — কম আলো ও মেঘলা পরিস্থিতিতে MPPT-এর উল্লেখযোগ্য সুবিধা আছে কারণ এটি আলোর মাত্রা পরিবর্তনের সাথেও প্যানেলের সর্বোত্তম অপারেটিং পয়েন্ট ক্রমাগত খুঁজে বের করে। বাংলাদেশের বর্ষা মৌসুমে বা ধোঁয়াশাচ্ছন্ন সকালে, একই প্যানেল থেকে MPPT, PWM-এর তুলনায় উল্লেখযোগ্যভাবে বেশি শক্তি সংগ্রহ করবে।
What happens if I connect the wrong controller to my system?ভুল কন্ট্রোলার সংযুক্ত করলে কী হবে?
If the controller is undersized (too few amps for your panel wattage), it will overheat and fail — potentially damaging the battery too. If you use a PWM with a high-voltage panel, the controller will work but waste a significant portion of your panel's energy. If you use MPPT where PWM was enough, it works fine — you just overspent. The worst outcome is always undersizing.কন্ট্রোলার ছোট সাইজের হলে (প্যানেল ওয়াটেজের জন্য অ্যাম্পিয়ার কম), এটি অতিরিক্ত গরম হয়ে নষ্ট হবে — সম্ভবত ব্যাটারিও নষ্ট করবে। উচ্চ-ভোল্টেজ প্যানেলে PWM ব্যবহার করলে কন্ট্রোলার কাজ করবে কিন্তু প্যানেলের উল্লেখযোগ্য অংশ নষ্ট হবে। PWM যথেষ্ট হলেও MPPT ব্যবহার করলে ভালোই কাজ করে — শুধু বেশি খরচ হয়। সবচেয়ে খারাপ পরিণতি সবসময় ছোট সাইজ করা।
Shop DEMUDA PWM and EPEVER MPPT charge controllers at Alobari — Cash on Delivery across Bangladesh, warranty support included. আলোবাড়িতে DEMUDA PWM ও EPEVER MPPT চার্জ কন্ট্রোলার কিনুন — বাংলাদেশজুড়ে ক্যাশ অন ডেলিভারি, ওয়ারেন্টি সহায়তাসহ।
Shop Charge Controllers at Alobari → আলোবাড়িতে চার্জ কন্ট্রোলার কিনুন →Panel 300W or under? Use PWM. It's reliable, affordable, and perfectly matched to standard home solar systems in Bangladesh. Any DEMUDA controller from our range will serve you well. প্যানেল ৩০০W বা তার কম? PWM ব্যবহার করুন। এটি নির্ভরযোগ্য, সাশ্রয়ী এবং বাংলাদেশের স্ট্যান্ডার্ড হোম সোলার সিস্টেমের জন্য নিখুঁতভাবে উপযুক্ত। আমাদের রেঞ্জের যেকোনো DEMUDA কন্ট্রোলার ভালোভাবে কাজ করবে।
Panel above 300W or 24V system? Use MPPT. The EPEVER 30A MPPT at ৳7,000 pays for its price premium through higher energy harvest — and it's the only correct choice for our Extended 24V solar package. প্যানেল ৩০০W-এর উপরে বা 24V সিস্টেম? MPPT ব্যবহার করুন। ৳৭,০০০-এ EPEVER 30A MPPT উচ্চতর শক্তি সংগ্রহের মাধ্যমে দামের পার্থক্য পুষিয়ে দেয় — এবং এটি আমাদের এক্সটেন্ডেড 24V সোলার প্যাকেজের একমাত্র সঠিক পছন্দ।